Vaporesso XROS 3 Pod Vape Kit

Vaporesso XROS 3 Pod Vape Kit | UK Next Day Delivery

Looking for craving flavours, a long battery life, and easy pod swaps? The Vaporesso XROS 3 Pod Kit hits all of those specifications. It’s designed for both beginner and experienced vapers who desire a clean, consistent experience.

The Vaporesso XROS 3 is one of the most elegant pod systems in the XROS family, designed to provide better taste, smarter airflow, and longer performance all in one single device. Whether you favour crisp MTL draws or a looser RDTL feel, this kit caters to your preferences with precision control and no complication.

Powered by a 1000mAh high-density battery and Vaporesso’s AXON chip, it has Pulse Mode output for taste that lasts from the first to the last puff. It has a refillable 2ml XROS pod with a built-in Restricted Direct-To-Lung (RDTL) coil, which eliminates the need for messy coil changes—just replace the pod when the flavour runs out.

With unmatched features like Pulse Mode, COREX mesh coil heating, and an SSS leak-proof design, the XROS 3 turns new users into loyal fans.

Specifications | Vaporesso XROS 3 Pod Vape Kit

Vaporesso XROS 3 Vape Kit Includes

• 1 Vaporesso Xros 3 Device
• 0.6 Ohm Vaporesso Xros Pod (Pre-Installed)
• 1.0 Ohm Vaporesso Xros Pod (in box)
• Reminder Card
• USB-C Charging Cable
• User Manual

Please note: The Vaporesso XROS 3 Kit is compatible with all XROS replacement pods, except for the XROS Pro pods, which are exclusively designed for use with the XROS Pro device.

How to Use & Set Up Vaporesso XROS 3 Pod Vape Kit

1. Fully charge the device
   To begin with, make sure to charge your XROS 3 using a USB Type-C cable. Pop it into an appropriate power supply and wait till the neon LED ceases to pulse. A full charge usually takes less than an hour.
2. Remove the Pod and Mouthpiece
   Gently pull the pod from the device. Grip black mouthpiece with your thumb and press it sideways; you will click off it without the need for tools.
3. Fill the pod
   You’ll see a little red hole under the mouthpiece. That is the fill port. Drop your e-liquid bottle into the hole and gently squeeze until the pod is full (up to 2ml). Don’t fill the middle hole—that’s for airflow.
4. Reattach the Mouthpiece
   Snap the mouthpiece back onto the pod firmly. You’ll hear a soft click when it’s locked in place. You can reinsert the pod into the device before this step to make it easier to hold.
5. Prime the Coil
   Let the filled pod sit upright for at least 5 minutes. This gives the coil time to absorb the liquid fully, helping prevent burnt hits and extending coil life.
6. Power On and Vape
   Click the fire button five times quickly to power the device on. Now you can also inhale in order to fire it, or also you can hold down the fire button and vape. The slider control on the back adjusts the level of the airflow and enables a tighter MTL draw or a looser experience of RDL.

Built to Perform, Styled for Comfort

The XROS 3 vape kit has a sleek body with rounded edges and a flat, lip-fit mouthpiece for a precise MTL draw. It’s small enough to fit in your pocket while yet providing a significant increase over disposables.

You may vape in two ways: by pressing the button or inhaling directly. In any case, the supply is quick, smooth, and customised to your airflow preferences.

XROS 3 Pods

The XROS pod line already offers 0.4ohm and 1.2ohm MTL versions, both intended for smooth flavours and simple top-filling with built-in mesh coils.

In new series you’ll get:

• Pre-installed 0.6ohm mesh pod for stronger vapour and RDTL.
• 1.0ohm Mesh pod provides a tighter, smoother MTL experience.

Both have a 2ml capacity and are compatible with nic salts or 50/50 freebase e-liquids.
XROS 3 Pods features SSS Leak-Resistant Tech that seals everything tight to avoid leaks or messes.

Steady Output with Smart AXON Chip Tech

The AXON chipset with Pulse Mode is at the core of the XROS 3 Device, delivering steady power throughout each puff—so flavour remains unchanged even when the battery runs low. The 0.6ohm pod provides up to 16W power, ideal for a gentle sub-ohm experience without heavy gear.

Custom Airflow, Just the Way You Like It

The XROS 3 features a little slider on the side that allows you to adjust from tight MTL to loose MTL to restricted DTL.

• Slide it closed for a tight pull (similar to smoking a cigarette).
• Open it slightly for a smoother, lighter puff.
• Open it more for a greater cloud and airy feeling.

Simply change the slider till it feels correct for you—quick and easy.

Battery That Lasts All Day

The 1000mAh battery can provide up to 48 hours of vaping with one-time full charge but it can also depend on pod resistance and your per day vaping. Charging is quick and simple with the provided USB Type-C connection. If you want more power and battery, you can also explore Vaporesso Luxe XR Max Pod Vape Kit.

What about the neon battery light? It changes colour to indicate your charge level, making it simple to know when to plug in.

Get High Power with COREX Heating

What distinguishes the XROS 3 is not just its design, but also its internal performance. Vaporesso’s COREX heating technology warms your e-liquid faster, evenly and effectively. This means no delay between inhalation and vapour, no cold puffs, and no taste drop-offs.

When combined with high-quality, fluffy cotton, the pod absorbs e-liquid more uniformly and holds it longer—reducing dry hits or overusing a pod too fast. The pod can last up to 20 days (Vaporesso Lab Tested) on average, depending on how often it is used.

Express Your Style with Attractive Colours

Vaporesso XROS 3 also has beautiful appearances in terms of performance. You can personalise your vape to match your specific style, mood, or setup because one of the features that make the product stand out in its category is its variety of colour options.

Available Kit Colours:

• Black
• Fresh Green
• Ice Blue
• Icy Silver
• Mint Green
• Navy Blue
• Neon Sunset
• Peach Pink
• Rose Pink
• Royal Gold
• Sky Blue
• Space Grey
• Synthwave
• Zenith

Performs Well with Both Nic Salts & Freebase E-Liquids

Whether you vape nic salts or freebase e-liquid, the XROS 3 can handle both without issue.

• The 0.6ohm mesh pod— ideal for freebase liquids with minimal nicotine and a stronger throat punch.
• The 1.0ohm pod tightens the draw, making it suitable for smooth, controlled doses with stronger nicotine salts.

Taking consideration of cigarette smoke, we suggest these nic salt strength with Vaporesso XROS 3 Pod Vape Kit.

All XROS pods are cross-compatible, allowing you to swap depending on your preferred feel or taste strength.